Matrix 6500™ Overview
The Matrix 6500 Dip & Dry Module was developed to meet the requirements of the moderate to high volume production facility. The unit was designed in modular fashion to allow process flexibility while at the same time optimizing product yields and throughput.
The Matrix 6500 allows for continuous coating of membrane for lateral flow assays and other, similar products. The integral High Efficiency Dryer provides for a hands-free drying process allowing improved efficiency and product quality.
Multiple recipe storage provides for simple and reliable set-up & operation while simplifying process validation.
Matrix 6500 Specifications
Web width*: 0.25 in. – 6 in. (0.6 cm – 15.2 cm)
*Wide webs require some options
Supply roll OD: 20 in. max (51 cm max)
Supply roll core ID: 3 in. (7.62 cm)
Dip tank with various saturation positions
Drying chamber path variable up to 50 ft. (15.24 m)
Dryer temperature: variable up to 80 °C (176 °F) max
Web speed 0.4 in./sec to 4.7 in./sec (1.0 cm/sec to 12.0 cm/sec)
(±2% full scale accuracy)
Lexan enclosure to minimize particulate contamination
Air dehumidifier for drying chamber (may be required for wide webs)
Web Steering Mechanism (required for wide webs)
Urethane Squeegee Roller Assembly
Power 200-240 VAC, 50/60 Hz, 30-50 Amps Single Phase
Amperage Varies Depending on Options
Pneumatic: 1 scfm / 80 - 120 psi
28 lpm / 5.5 - 8.3 bar
Width: 108 in. (2.7 m)
Depth: 35 in. (0.9 m)
Height: 69 in. (1.75 m)
Weight: 1100 lbs (500 kg)
Matrix™ is a registered trademark of Kinematic Automation Inc.
Specifications subject to change without notice
Kinematic does not collect or store any personal information about you when you browse our website
Copyright © 2019 Kinematic Automation Inc.
Kinematic Automation Inc.
PO Box 69 Twain Harte, CA 95383
Tel: 1.209.532.3200 Fax: 1.209.532.0248