 1600 Reagent Dispensing Module |
 |
Key Features
- Easy set-up and use
- Touch screen operator interface
- Easy change from lines to dots
- Small footprint, bench top application
- Integrated control system
- R&D or production capable
- Contact or non-contact dispensing
- Easy programming of dispense rate (ul/cm)
- Easy programming of platen speed (cm/sec
Capacities
- Sheet size ............................................ 4" x 13" (108 x 320mm)
- Number of lines ..................................... 1 to 4
- Supply Reservoir ................................... 7ml
- Standard Syringe ...................................100ul (other sizes available)
Dispensing Capabilities
- Minimum dot volume .............................. .5ul
- Minimum dot spacing ............................. 0.08" (2mm)
- Platen speed ........................................... 0.79" to 4.72"/sec (2 to 12cm/sec)
- Striping Dispense Rate ..........................1.3 to 51 ul/inch (0.5 to 20 ul/cm)
- Standard Minimum Line spacing .......... 0.2" (5mm)
Accuracy
- Dispense rate ........................................ ± 1%
- Platen speed ......................................... ± 1%
Facilities Requirements
- Power
..................................................... 110-120 VAC 50/60 Hz
0.8 Amp
207-244 VAC 50/60 Hz 0.4 Amp - Process Air ............................................. 3cfm @85psi (85 l/min@5.86 bar); clean, dry air
Dimensional Specifications
- Size
....................................................... 19"D x
*22" W x
15"
H
*Moving platen extends up to 4.75" (12cm) beyond ends - Weight ................................................... 80 lbs (37kg)